1) Knitting Department

1. Circular Knitting

2. Flat Bed Knitting

3. Inspection Machines

Two tabular inspection machines.

The knitting department is humidified and equipped with lent removal by suction.

All machines are equipped with Lycra/spandex feeders.

All machines and creels are fully independently screened.

2) Piece Dyeing Department

1. THIES M/Cs

2. SCHOLL M/Cs

10.  Colorstar                                       capacity 400kg            1 compartment

11.  Colorstar                                       capacity 400kg            2 compartments

12.  Colorstar                                       capacity 600kg            3 compartments

13.  Colorstar                                       capacity 1000kg          5 compartments

14.  Colorstar                                       capacity 1200kg          6 compartments

3. FONG M/Cs

15. GN-6                                             capacity 350 kg           2 compartments

16. GN-6-1T                                        capacity 100 kg           1 compartment

17. GN-6-1T                                        capacity 30 kg             1 compartment

4. TUNG M/Cs

18. Tung Shing                                    capacity 200 kg           2 compartments

19. Tung Shing                                    capacity 500 kg           5 compartments

Barco-Sedo fully automatic control system for Dye House

5. HYDRO EXTRACTORS SECTION

1.      Air balloon hydro extractor CABER

2.      Air balloon hydro extractor CALATOR

6. DRYING SECTION

1.      Santex dryer width 230 cm type JUMBO

7. SLITTING SECTION

1.      Knitted fabric slitter BIANCO

2.      Knitted fabric slitter BIANCO

3.      Knitted fabric slitter ERHARDT-LEIMER

3) Yarn Dyeing Department

A.      THIES M/Cs

1.      Eco-bloc cone dyeing m/c capacity 100 kg.

2.      Eco-bloc cone dyeing m/c capacity 200 kg.

3.      Eco-bloc cone dyeing m/c capacity 400 kg.

B.     CAVISA M/Cs

1.      Autoclave cone dyeing m/c capacity 500 kg.

2.      Autoclave cone dyeing m/c capacity 350 kg.

3.      Autoclave cone dyeing m/c capacity 150 kg.

4.      Autoclave cone dyeing m/c capacity 100 kg.

C.     HIGH FREQUANCY DRYER

1.      RF dryer 60 kw STALAM

2.      RF dryer 85 kw STALAM

D.     CONE HYDRO EXTRACTORS SECTION

1.      Centrifugal hydro extractor capacity 50 kg DETTIN

2.      Centrifugal hydro extractor capacity 150 kg CAVISA

E.     WINDING M/Cs

1.      Auto coner 338 SCHLAFHORST 50 spindle with loepfe TK 940 FN.

2.      Auto coner 338 SCHLAFHORST 50 spindle with loepfe TK 940 FN.

3.      Auto coner 338 SCHLAFHORST 40 spindle with loepfe TK 840

4.      SIMET winding m/c 96 spindle

4) Printing Department

1-      FABRIC PRINTING MACHINE

a)      Zimmer flat bed m/c 12 colors and one rotary screen

b)      Zimmer flat bed m/c  8 colors

c)      Stork MBK sampling m/c one flat screen and one rotary screen
 

2-      CONTINUOUS STEAMING & CURING M/Cs

a)      Continuous steaming & curing m/c width 220 cm type SALVADE

b)      Continuous steaming & curing m/c width 250 cm type ASCME

3-      PLACEMENT PRINTING M/Cs

a)      MHM placement printing m/c 10/12 station

b)      MHM placement printing m/c 12/14 station

c)      MHM placement printing m/c 16/18 station

d)      2 Garment dryers

4-       Heat Transfer Press

8 Heat transfer press type ET.S.

5) Finishing Department

1-      OPEN WIDTH FINISHING

1.      One Stenter frame width 220 cm oil heating 5 compartments type BRUCKNER with weft straightened type MAHLO

2.      One Stenter frame width 160 cm oil heating 6 compartments type BRUCKNER

3.      One Stenter frame multi tire width 200 cm oil heating 6 layers type KRANZ with weft straightened type MAHLO

4.      One Lafer open width compacting m/c for knitted fabric width 240cm

2-      TUBULAR FORM FINISHING

1.      Tubular compacting calendar for knitted tubular fabric width 120 cm type    FERRARO

6) Laboratory

• 1 Datacolor matching system ver. 3.5, spectrophotometer spectra flash SF 500

• 1 Datacolor matching system ver. 3.5, spectrophotometer spectra flash SF 600

• 1 Color master matching system from Barco Sedo VER. 1.7 with Minolta spectrophotometer 3600 D

• 1 Datacolor Auto lab Dispensing module GT uses gravimetric dispensing

• 2 Ahiba nuance top speed sample dying m/c 12 set

• 1 Laboratory dyeing and fastness testing m/c type linitest

• 1 Dryer Horo for perspiration test

• 1 Dryer ARI J. Levi for perspiration test

• 1 Roches dryer (Mini Stenter)

• 2 Fong S machine for dyeing samples model: SMD2-12 SET

• 1 Pilling tester James Heal and Co.

• 1 Random Pilling Tumble tester Atlas Electric devices

• 1 Rubbing tester James Heal and Co.

• 1 Laboratory Padding Mangle type Rapid

• 1 Wash Tec Roaches

• 4 Washing m/c

• 3 Tumble dryer

• 1 Light box multi light

• 1 Light box Vervide

7) Garment Manufacturing Department

( Pattern Making - Cutting – Sewing – Ironing – Packing )

• Pattern Making :-

-      One Investronica system for marker producing complete with plotters

-      One Gerber system for marker producing complete with plotters .

• Cutting :-

8 Tables with 6 Westima band knifes + Gerber Cutter Machine + 2 spreading machines + air-condition .

• Sewing :-

• Ironing :-

24 tables + air-condition

8) Embroidery
 

• Five machines ZSK, two of them with 6 head / 12 colors and the other three with 12 head / 12 color

• One machine Barudan with 15 head / 15 colors

• One machine Barudan 6 heads / 12 colors

• One laser cutting m/c

9) Service Stations

1. Steam generating station

• 4 boilers, capacity 24 ton steam/hr up to 12 bars pressure

2. Water treatment station

• 3 water treatment stations for dyeing machines

3. Thermal oil heating station

• 4 boilers all gas fired

4. Compressed air station

• 5 compressors capacity 10m3/hr/unit

5. Sewage water treatment unit